Dynamic Seam Fatigue Tester, to determine the strength of upholstery seam constructions covering a standard foam composite cushion by imposing a cyclic, impact and penetrating load.

A rubber-faced wheel of 127mm (5”) diameter impacts the fabric from a height of 150mm (6”) with a mass of 3.75 kg (8.25lbs), 25 times per minutes for 7000 cycles. Compressed air is required.

Dynamic Seam Fatigue Tester is 3 work positions, and 6 positions offered on request.

Specifications

Testing frequency 25+/-2 cycle/min
Testing cycles 7,000
Impacting mass 3.75 kg
Foam composite 228.5 x 280 x 178 mm
Dimensions of sewn specimen 360 x 255mm
Driving mode Pneumatic

Standards	ASTM D4033
Power	220 /110 V 50/60 Hz 0.4 ~ 0.7 Mpa
Weight	350 Kg
Dimensions	1600 x 860 x 1450mm (L x W x H)

Product Tags:

Dynamic Seam Fatigue Tester Abrasion And Pilling And Snag Testing Equipment With 3 Or 6 Work Positions

Textile Testing Equipment

Yarn Testing Equipment

Fabric Testing Equipment

Fiber Testing Machine

Medical Face Mask Machine

Color Fastness Testing Equipment

Dyeing Lab Equipment

Fabric Sample Cutting Machine

Flammability Testing Equipment

Textile Tensile Testing Machine

Washing Shrinkage Testing Equipment

Climatic Test Chamber

Abrasion And Pilling And Snag Testing Equipment

Dynamic Seam Fatigue Tester Abrasion And Pilling And Snag Testing Equipment With 3 Or 6 Work Positions

Dynamic Seam Fatigue Tester With 3 Or 6 Work Positions By Standard ASRM D4033

Application

flexural strength testing machine

tensile strength testing procedure

reduction in area tensile test